|
Title: Advice needed Post by: charles price on May 21, 2012, 08:13:36 PM I have a fisher f4 with push fit coil connection bought nel coil it has screw fit connection do i send it back to regton or take detector apart and fit new connecter to control box regton and pepsi piros cant get coil with push fit >:( >:( >:( >:( >:( >:(
Title: Re: Advice needed Post by: Chef Geoff on May 21, 2012, 08:31:50 PM Hi Charles as you probably know the push connector is made for the older F4 (and bounty hunter) the screw fit is on the F2 though they both work on the same frequency so the coil is fine. My advice would be to leave the on-board socket alone but change the plug at the end of the coil lead. The push ones are just 5? pin DIN plugs and are easily obtained from the likes of Maplin. If you have a store locally that you can get to then take the coil with you to ensure you get the right pin grouping. ;)
Title: Re: Advice needed Post by: charles price on May 21, 2012, 08:47:36 PM Thanks for reply Geoff i thought of doin that but wasnt sure if it would work as i would have not been able to send it back :) :) :) :) :)
Title: Re: Advice needed Post by: Chef Geoff on May 21, 2012, 09:10:50 PM Well you have a point there ??? If you do decide to change the on-board socket I would also buy a new plug for your existing coil as if the Nel does fail for whatever reason then at least you will still be able to use the machine ;)
Title: Re: Advice needed Post by: gijan on May 21, 2012, 09:51:41 PM charles has started 2 change plugs......keep u updated..... ??? ??? ??? ???
Title: Re: Advice needed Post by: gijan on May 21, 2012, 10:23:18 PM all sorted....very happy chappy...... ;D ;D ;D ;D..changed the fitting on control box and WORKING... ::) ::) ::)...
|